• Remove all dust, loose particles, grease and traces of foreign materials.
  

• Recommended to dampen the dry concrete / plastered surfaces when necessary before the application of V-Mix Thin Mix

• Apply V-MIX Finish Coat with a steel trowel to an average thickness of 1 to 2mm.
  

• If surfaces require more layers to achieve build-up thickness , the underneath layers must let dry partially before apply subsequent layers.

Note:  The technical information contained in this publication is, to the best of our knowledge, true and reliable and is supported by the present state of our information available. According to the care taken  and the method of application, upon which we have no influence, the values are subject to divergence.  Our warranty is , only limited to the quality of the materials supplied. The user is responsible for checking the suitability of the products for their intended application.

• Mix 40kg bag of V-Mix Thin Mix with 14 to 15 Litres of clean water using an electrical power mixer 3 to 5 minutes until the homogeneous paste is achieved.
  

• Re-mix the paste before reuse if material left unused more than 30 minutes.

V-Mix Thin Mix is a high quality polymer modified water resistant cement-based thin   plaster used as finishing coat for walls and     ceilings. V-Mix Thin Mix specially formulated for direct application onto concrete and plastered surfaces for leveling and smoothening works.