• Mix 25kg bag of V-Mix Finish Coat with 10 to 11 Litres of clean water using an electrical power mixer 3 to 5 minutes until the homogeneous paste is achieved.
  

• Re-mix the paste before reuse if material left unused more than 30 minutes. 

V-MIX Finish Coat  is a high quality polymer modified cement-based finish coat recommended for smooth finishing works direct onto V-mix Base Coat, plastered or  concrete surfaces.  Recommended  for  internal usage.

 
 

Note:  The technical information contained in this publication is, to the best of our knowledge, true and reliable and is supported by the present state of our information available. According to the care taken  and the method of application, upon which we have no influence, the values are subject to divergence.  Our warranty is , only limited to the quality of the materials supplied. The user is responsible for checking the suitability of the products for their intended application.

• Remove all dust, loose particles, grease and traces of foreign materials.
  

• Recommended to dampen the dry concrete / plastered surfaces when necessary before the application of V-Mix Finish Coat

• Apply V-MIX Finish Coat with a steel trowel to an average thickness of 1 to 2mm.
  

• If surfaces require more layers to achieve build-up thickness , the underneath layers must let dry partially before apply subsequent layers.