• V-Mix Thin Render 510  can be applied manually with a steel trowel or spatula to an average thickness of 5 to 10mm over a minimum of 2 coats.
  

• For application more than one build-up,  each build-up layers need to dry at least  3-7 days to provide a good surface for the subsequent layers of render to bond to.

• Mix 40kg bag of V-Mix Thin Render 510 with 8 to 9 Litres of clean water using an electrical power mixer.
  

• Allow mixer to stand for 3 to 5 minutes until the homogeneous paste is achieved.

• Re-mix the paste before reuse if material left unused more than 30 minutes.

Note:  The technical information contained in this publication is, to the best of our knowledge, true and reliable and is supported by the present state of our information available. According to the care taken  and the method of application, upon which we have no influence, the values are subject to divergence.  Our warranty is , only limited to the quality of the materials supplied. The user is responsible for checking the suitability of the products for their intended application.

V-Mix  Thin Render 510 is a high quality polymer modified water resistant cement-based Render. V-Mix Thin Render 510 specially formulated for    internal and external application onto concrete surfaces for patching, repairing and  surface leveling job. Recommended skimming with V-Mix Base Coat and V-Mix Finish Coat for smooth finishing . For    sanded texture, sponge 
 

• Remove all dust, loose particles, grease and traces of foreign materials.
  

• Recommended to dampen the dry concrete surfaces when necessary before the application of V-Mix Thin Render 510