Note:  The technical information contained in this publication is, to the best of our knowledge, true and reliable and is supported by the present state of our information available. According to the care taken  and the method of application, upon which we have no influence, the values are subject to divergence.  Our warranty is , only limited to the quality of the materials supplied. The user is responsible for checking the suitability of the products for their intended application.

• Mix 25kg bag of V-Mix Tile Adhesive 35 with 6 to 7 Litres of clean water using an electrical power mixer 3 to 5 minutes until the homogeneous paste is achieved
  
• Re-mix the paste before reuse if material left unused more than 30 minutes. 

• Mix 25kg bag of V-Mix Tile Adhesive 68 with 7 to 8 Litres of clean water using an electrical power mixer 3 to 5 minutes until the homogeneous paste is achieved
  
• Re-mix the paste before reuse if material left unused more than 30 minutes. 

• Using notched trowel spread V-Mix Tile Adhesive 35  on the substrate uniformly
  
• Comb the adhesive to adjust the thickness required
  
• Spread a thin coat of adhesive of 2-3mm on underside of the tile
  
• Press the tiles firmly into position by twisting action. Gently tap with wooden hammer to make the surface uniform

• Remove all dust, loose particles, grease and traces of foreign materials.​
  
• Recommended to dampen the dry concrete / plastered surfaces when necessary before the application of V-Mix Tile Adhesive 68. 

V-Mix Tile Adhesive 35 is a high quality polymer   modified water resistant cement-based tile   adhesive ideal for ceramic tiles of small & medium sizes on walls and floors.  V-Mix Tile Adhesive 35 has an excellent waterproofing ability . Suitable for both internal and external application.

 

V-Mix Tile Adhesive 68 is a high quality polymer modified water resistant cement-based tile   adhesive with high bond strength ideal for ceramic , porcelain homogeneous tiles and mosaics of medium and large sizes on walls and floors.  V-Mix Tile Adhesive 68 has an excellent waterproofing ability . Suitable for both internal and external application. 

• Using notched trowel spread 4-6mm of V-Mix Tile Adhesive 68  on the substrate uniformly
  
• Comb the adhesive to adjust the thickness required
  
• Spread a thin coat of adhesive of 2-3mm on underside of the tile
  
• Press the tiles firmly into position by twisting action. Gently tap with wooden hammer to make the surface uniform

• Remove all dust, loose particles, grease and traces of foreign materials.​
  
• Recommended to dampen the dry concrete / plastered surfaces when necessary before the application of V-Mix Tile Adhesive 35.

Note:  The technical information contained in this publication is, to the best of our knowledge, true and reliable and is supported by the present state of our information available. According to the care taken  and the method of application, upon which we have no influence, the values are subject to divergence.  Our warranty is , only limited to the quality of the materials supplied. The user is responsible for checking the suitability of the products for their intended application.